- Other Seaward Sites:
CONTINUITY / NON CONTINUITY TEST
In 2 wires mode
Test voltage 5 V to 25 V
Test current 10 mA to 2.5 A
Continuity low limit 0 Ω to 250 Ω
Continuity high limit 1 Ω to 250 Ω
Test time 0 to 99 s
Accuracy ± 2%
In 4 wires mode (Kelvin Method)
Test voltage 5 V to 25 V
Test current 10 mA to 2.5 A
Continuity low limit 500 μΩ to 250 Ω (according to test current)
Continuity high limit 500 μΩ to 250 Ω (according to test current)
Test time 0 to 99 s
Accuracy from 1 mΩ to 5 mΩ : ± 5% and from 5 mΩ to 250 Ω : ± 2%
There is a possibility to couple to both continuity test (2 and 4 wires mode) a micro-cuts test which allows to detect intermittent contacts of minimum 1 μs.
INSULATION TEST
Test voltage from 20 V to 500 VDC or 2 000 VDC (according to switching
card type) - 1 V steps
Insulation limit from 50 kΩ to 500 MΩ under 500 V, and from 50 kΩ to 2 GΩ under 2 000 V
Accuracy ± 5%
Short-circuit current 5 mA
Rising time from 10 ms to 99 s
Holding time from <10 ms to 99 s
DIELECTRIC STRENGTH TEST (HIPOT)
�� In DC
Voltage from 20 V to 500 VDC or 2000 VDC (according to switching card type) - 1 V steps
Breakdown current from 500 μA to 10 mA (ΔI)
Rising time from 10 ms to 99 s
Holding time from 10 ms to 99 s
�� In AC (option)
Voltage from 20 V to 350 VAC or 1500 VAC (according to switching card type) - 1 V steps
Breakdown current from 500 μA to 10 mA (ΔI)
Rising time from 500 ms to 99 s
Holding time from 20 ms to 99 s
DIODE MEASUREMENT, TRANSIL
Test current from 10 mA to 2 A
Limit voltage from 100 mV to 20 V (by application of a current) and from 20 V to 90 V (by application of a voltage)
Accuracy ± 5%
RESISTANCE MEASUREMENT (AUTOMATIC RANGES)
Resistance from 100 mΩ to 10 MΩ with Kelvin Method
Test time from 3 ms to 99 s
Test current from 1 μA to 10 mA
(not programmable)
Accuracy ± 2%
SHIELDING, TWISTED PAIRS, COAXIAL CABLES
Capacity from 100 pF to 10 μF
Accuracy ± 5%
Voltage limited at 5 V
Auto range 1 μA up to 10 mA
CAPACITOR
Capacity from 100 pF to 100 mF
Accuracy ± 5 pF ± 10%
CAPACITOR in AC (option)
Capacity from 100 pF to 2 mF
Accuracy ± 5 %
AC voltage limited at 450 mV, + automatic ranges
INDUCTANCE (option)
Inductance limit from 100 μH to 2 H
Accuracy ± 5%
