• Other Seaward Sites:

RMG12DC Hipot Tester

RMG12DC Hipot Tester

The RMG12DC is a 12kV DC hipot tester which carries out DC dielectric strength testing up to 12000V DC.

 Suitable for the Aerospace Industry.

 View the RMG12DC hipot tester on the manufacturer's website.

 

 

Customer Comments

No comments have been made about this product. Be the first to let us know what you think.

Knowledge Base

You must be registered to view Knowledge Base articles related to this product. Please register or log-in to view these articles.

Key Features

  • Dielectric strength test tp 12000V DC
  • Multilingual software
  • RS232, IEEE488-2, PLC or 0-10V interfaces
  • 8 test step sequences
  • Easy to use and user friendly interface
  • Dedicated for laboratory and production lines

Downloads

There are no downloads currently available for this product.

Technical Specification

  • DIELECTRIC STRENGTH TEST FUNCTION

Output Voltage

  • 0 to 12kV DC
  • Accuracy: ±(2% + 50V) of the preset value between 200 to 12000V and for a current <100μA with the detection modes: ΔI, IMAX or ΔI+IMAX

Voltage Reading

  • On a digital kilovoltmeter connected on the output terminals
  • Accuracy: ±(1.5% + 20V)
  • Display: 1200 digits

Stability

  • Less than 1% for a mains variation of ±10%

Current

  • Short circuit current: 10mA DC

Current Reading

  • On a shunt resistor inserted in the test circuit
  • Accuracy: ±(2.5% + 20U) with 1U = 0.01mA
  • Display: 1000 digits

Breakdown Detection

  • "DELTATEST" detector adjusted for ΔI = 1mA ±10% with 10 μsec + 20%
  • Total insensitivity to current due to the resistance and the capacitance of the device under test
  • "IMAX" detection by maximum current adjustable from 0.01mA to 10mA by 0.01mA steps
  • DELTATEST and IMAX mode combination

IMIN Threshold Function

  • Adjustable from 0.00 to 10mA

Breakdown Indication

  • By visual (LCD screen and LED) and sound signal
  • Breakdown voltage and current are stored on the LCD display
  • HV primary transformer shorted when the output voltage is switched off

Timer

  • Rise, hold and fall time adjustment between 0 and 999 sec.

Storage

  • 10 test parameter (voltage, threshold, time...) sets can be stored

 

REMOTE CONTROL SOFTWARE

Application Software

  • SMGPRO: Powerful software controlling the MG series according to your application

 

PROTECTIONS

Instrument

  • By slow blow fuse

Operator

  • No HV or current on the outputs as long as the safety interlock is open
  • Red green lamp to indicate HV presence
  • Double safety loop which can be used with safety block devices

Device Under Test

  • Fast breakdown detection
  • HV primary cut off
  • Output terminal shorted and capacitors discharged

 View full technical specification of the RMG12DC hipot tester

Knowledge Base

Product Matrix

The Product Matrix allows you to compare the features of up to 5 products. Simply check the box next to the products you wish to compare then select the 'Compare Products' button.

Product Enquiry

Contact Information

indicates required field
Title*
Please type in the validation code from the image (case sensitive).

Additional Information (optional)

 
Site engineered by NorthBloc   
© 2010, Seaward Electronic Group Ltd. All rights reserved.