RXS500/506 Hipot Tester
The RXS500 is a hipot tester which together with the FMG rack can perform leakage current measurement under nominal voltage, and power measurement for single phase equipment and three phase equipment.
Complies with:
EN61010-1, EN60065, EN61335-1, EN60950, EN60598-1, EN60601-1 standards
View the RXS500 hipot tester on the manufacturer's website
Key Features
- Dielectric strength tester from 0 to 5 kVAC and 0 to 6 kVDC (RXS56, RXS506 models)
- 8 test step sequences
- 50 parameter sets storage
- Built in RS232C interface
- ETHERNET, PLC or IEEE4882 interfaces on option
Downloads
Please feel free to download any of the documents associated with this product.
Technical Specification
DIELECTRIC STRENGTH TEST FUNCTION
Output voltage
- 0 to 5 kV AC (50 or 60 Hz).
Limited to 4.2 kV AC with FMG501
- 0 to 6 kV DC (RXS56, RXS506)
- Accuracy: ± (2%+50 V) (RXS50) and ± (3%+50 V) (RXS500) of the preset value between 100 to 5000 V and for a current < 100 μA (RXS50) and < 1 mA (RXS500) with the detection modes: DI, IMAX or DI+IMAX
Voltage reading
- On a digital kilovoltmeter connected on the output terminals
- Accuracy: ± (1.5% + 20 V)
- Display: 600 digits
Stability
- Less than 1% for a mains variation of ± 10% (RXS50)
- Less than 3% for a mains variation of ± 10% (RXS500)
Current
- Short circuit < 13 mA AC (RXS50/56) and < 9 mA DC (RXS56) for the max. voltage adjustment
- Short circuit > 200 mA AC (RXS500/506) and >20 mA DC (RXS506) for the max voltage adjustment
- Short circuit duration limited to 5 seconds
- Nominal current : 10 mA AC (RXS50/56) and 4 mA DC (RXS56)
- Nominal current : 10 mA DC (RXS506) and 110 mA AC (RXS500/506)
Current reading
- On a shunt resistor inserted in the test circuit
- Accuracy: ± (2.5% + 2U)
1U = 0.01 mA (RXS50)
1U = 0.1 mA (RXS500)
- Display: 1000 digits
Breakdown detection
- "DELTATEST" detector adjusted for DI = 1 mA ± 10% (RXS50) and DI = 10 mA
± 10% (RXS500) with 10 μsec. ± 20%.
Total insensitivity to current due to the resistance and the capacitance of the device under test
- "IMAX" detection by maximum current adjustable from 0.01 to 10 mA, by 0.01 mA steps (RXS50) and from 0.1 to 110 mA by 0.1 mA steps (RXS500)
- DELTATEST and IMAX mode combination
IMIN threshold function
- Detects whether the probe is properly
connected to the specimen under test
- Adjustable from 0.01 to 10 mA (RXS50) and from 0.1 to 110 mA (RXS500)
DC voltage (RXS56, RXS506 models)
- Positive pole grounded
- —Ripple < 1% for I < 100 μA (RXS56) and I < 1 mA (RXS506)
Breakdown indication
- By visual (LCD screen and LED) and sound signal
- Breakdown voltage and current are stored on the LCD display
- HV primary transformer shorted when the output voltage is switched off
Timer
- Rise, hold and fall time adjustment between 0 and 999 sec.
- Fast mode : (rise + hold) < 900msec.
Storage
- 10 test parameter (voltage, threshold, time,...) sets can be stored
GENERAL CHARACTERISTICS
Presentation
- Table top unit
- Metal case
Dimensions
- Height : 131 mm
- Width : 440 mm
- Depth : 450 mm
Weight
Power
- 230 V or 115 V ± 15% single phase, 4763 Hz
- Consumption: 70 to 600 VA depending on test
Operating temperature
Storage temperature
Overvoltage category
Pollution degree
Safety class
- Class I (earth connection)
View full technical specification
Product Matrix
The Product Matrix allows you to compare the features of up to 5 products. Simply check the box next to the products you wish to compare then select the 'Compare Products' button.
.jpg)
.jpg&width=80)
